|
plans
The plan hereafter gives all the measurements directly from the kite.
Before cutting the material you must add margins :
- two centimeters margin to make a fold
(on all the sail sides)
- two centimeters margin to assemble material
pieces
Note that the two triangles are not assembled strictly aligned, but are
shifted with 7 cm from a straight line going through the top of the kite.
-
sail is made from spinnaker material (Ripstop Nylon),
- top of the sail is "ventilated" with a 3 centimeters mesh band,
-
sheaths and reinforcements are made from dacron material,
-
the spars are made from carbon fiber bars.
|
